Powersoft O12K4-D-D,  DSP + Dante Enabled High Efficiency Amplifier (watts/channel 2|4|8 ohms - 1000|1500|850)

Powersoft O12K4-D-D, DSP + Dante Enabled High Efficiency Amplifier (watts/channel 2|4|8 ohms - 1000|1500|850)

  • $10,275.00
    Unit price per 
Shipping calculated at checkout.


The Ottocanali 12K4 is a flexible and reliable 8-channel power amplifiers with up to a total of 12,000 W at 4Ω, ideal for multi-zone applications in medium to large-scale installs: Ottocanali 12K4 supports any combination of lo-Z loudspeakers, mono-bridgeable channel pairs and 70V/100V Hi-Z distributed lines with no need for output step-up transformers. The Ottocanali 12K4 features switchable main/aux signal inputs and offers a wide range of system control, alarms, GPI/O and monitoring functions as well as sound shaping options.

The Ottocanali 12K4 implements redundant universal switch mode power supplies with PFC and patented SRM (Smart Rails Management) technology maximizing reliability, efficiency and reducing power consumption.

New Ottocanali 12K4 DSP+D heralds new and innovative level of signal processing, providing non-boolean routing and mixing, multi-stage equalization with raised-cosine, IIR and FIR filters, delay up to 2 s in input processing and 100 ms for time alignment, gain and polarity adjustment, crossover, peak limiters, TruePower™ limiters and Active DampingControl™.

Powersoft’s legendary efficiency saves valuable energy, keeping both operational cost and ‘carbon footprint’ at a minimum: the Ottocanali 12K4 shines with outstandingly low power consumption and heat dissipation; This dramatically reduces costs from the AC mains supply and air conditioning/cooling systems – not to mention the benefits to the environment for a greener planet

Power supply

  • Redundant universal switch mode power supply up to 400VAC tolerant with Power Factor Correction
  • Patented output filter with ripple cancellation network
  • Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
  • Detachable AC mains cable with IEC C19/22.2 (16A for EU, 20 A for USA) socket

Protections
Fully protected circuit design with:

  • Ac protection: shut down power supply when AC mains voltage is outside operating range
  • Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
  • DC protection: protects against infrasonic signal at the outputs
  • VHF protections: protects the loudspeakers against non audible, strong, non musical high frequency signals
  • Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
  • Long term limiter: protects the loudspeaker against steady long term rms (non audio) signals reducing maximum output
  • Thermal protection: output stages operating temperature up to 80 °C (176 °F)
  • Temperature controlled continous variable speed fan, front to back airflow

General

  • Fixed frequency switchmode output stage for high grade sound accuracy
  • All models 2 RU for reduced rack cost and space
  • Light weight - for easier racking and shipping: 14 kg / 30.8 lbs
  • Standard Phoenix connectors: analog and digital input, audio outputs, aux supply, alarms and GPIO
  • Remotely switchable double input (main and aux) per channel

Loudspeaker system configuration

  • Direct drive either low impedance loads or 70V / 100V Hi-Z distributed lines
  • Switchable 35Hz / 70Hz high pass filter per channel
  • Mixed configuration with Lo-Z/Hi-Z systems possible
  • Bridged mode low impedance per channel pair

Alarms and GPIO

  • General Purpose Input/Output alarm interfaces:
    • dangerous DC in the output power signal
    • thermal stress
  • Configurable alarm contact NC/NO per channel
  • Remote AUX input / MAIN input switch
  • Remote ON/OFF switch
  • PWS OUT connector providing up to 24VDC

Digital Signal Processing

  • TI C6000 DSP platform architecture
  • AD/DA converter: dual 24bit @ 96 kHz Tandem® architecture, 127 dB dynamic range, per channel
  • Input/output independent equalizers per channel providing Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
  • Crossovers: linear phase (FIR), hybrid (FIR-IIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)
  • Input delay up to 4 s and output delay up to 200 ms for time alignment per channel
  • Active DampingControl™ for cable compensation
  • Power limiter (TruePower™, RMS voltage, RMS current) + Peak Limiter

Remote management

  • General
    Number of channels 8
     
    Output power Single channel mode Distributed line* Bridge mode
    2 Ω 4 Ω 8 Ω   70V 100V 4 Ω 8 Ω 16 Ω  
    1100 W 1500 W 850 W   1500 W 1500 W 2200W 3000W 1700 W  
    Max output voltage / current 150 Vpeak / 54 Apeak 100 Vpeak 140 Vpeak 300 Vpeak
     
    AC Main Power
    Power supply Reduntant, universal, regulated switch mode with PFC
    Nominal power requirement 100-240 V ±10%, 50-60 Hz
    Operating voltage 90 V - 264 V
    Power consuption** 115 V 230 V
    Idle 47 W 0.75 A 50 W 0.7 A
    1/8 of max output power @ 4 Ω 2075 W 18.5 A 2115 W 9.7 A
    1/4 of max output power @ 4 Ω 4150 W 36 A 4230 W 18.6 A
     
    Thermal
    Operating temperature range 0° - 45° C | 32° - 113° F
    Thermal dissipation** 115 V 230 V
    Idle 160 BTU/h 40.3 kcal/h 170 BTU/h 42.8 kcal/h
    1/8 of max output power @ 4 Ω 2141 BTU/h 539.5 kcal/h 1937 BTU/h 488.1 kcal/h
    1/4 of max output power @ 4 Ω 4283 BTU/h 1,079.3 kcal/h 3874 BTU/h 976.2 kcal/h
     
    AUDIO
    Gain 32 dB
    Input sensitivity 1.94 V / 8 dBu
    Max input level 6 V / 17.8 dBu
    Frequency response 20 Hz - 20 kHz (±0.5 dB) @ 1 W, 8 Ω
    S/N ratio > 109 dB (20 Hz - 20 kHz, A weighted)
    Crosstalk separation > 70 dB @ 1kHz (4 Ω)
    THD+N < 0.08% from 0.1 W to full power (typically <0.05%)
    IMD < 0.8% from 1 W to full power (typically <0.05%)
    Input impedance 10 kΩ balanced
    Slew rate 50 V/μs @ 8Ω, input filter bypassed
    Damping factor > 10000 @ 100 Hz (Lo-Z)
     
    DSP
    AD Converter 24 Bit Tandem™ @ 96 kHz 129 dB-A Dynamic Range - 0.00056 % THD+N
    DA Converter 24 Bit Tandem™ @ 96 kHz 121 dB-A Dynamic Range - 0.00084 % THD+N
    Internal precision 40 bit floating point
    Input equalizer Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
    Crossover linear phase (FIR), hybrid (FIR-IIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)
    Delay 2 s (input) + 100 ms (output) for time alignment
    Input EQ
    Limiters TruePower™, RMS voltage, RMS current, Peak limiter
    Damping control Active DampingControl™
     
    Front panel
    Indicators and Controllers 8 x LED bar - Signal level and over-temperature protection
    8 x Knob - Level attenuator (continuous)
    1 x Push-button - Toggle PWS OUT
    4 x DIP switch - Toggle energy save on/off per channel pair
    Connectors
    AC main 1 x IEC C20 connector - 20 A max (region-specific power cord provided)
    Audio signal input 1 x 12 pin Phoenix MC 1.5/12-ST-3.81 - Signal input – MAIN
    1 x 12 pin Phoenix MC 1.5/12-ST-3.81 - Signal input – AUX
    Alarm 2 x 12 pin Phoenix MC 1.5/12-ST-3.81 - Alarm connector
    Remote command 1 x 4 pin Phoenix MC 1.5/4-ST-3.81 - Remote line/aux switch and PWS out
    1 x 4 pin Phoenix MC 1.5/4-ST-3.81 - Remote on/off switch and aux voltage
    Loudspeakers 2 x 8 pin Phoenix DFK-PC 4/8-G-7.62 - Signal output
     
    Rear panel
    Indicators and Controllers 8 x DIP switch - Toggle lo/hi impedance connection
    8 x DIP switch - Toggle 70V/100V distributed line nominal voltage
    8 x DIP switch - Toggle High Pass Filter
    8 x DIP switch - Toggle 35Hz/70Hz HPF cutting frequency
    1 x Power switch -
     
    Construction
    Dimensions (L x H x W) 483 mm x 89 mm x 360 mm (19.0 in x 3.5 in x 14.2 in)
    Weight 14 kg (30.9 lb)

We Also Recommend