Powersoft T302, 2 Channel Touring Amplifier.

  • $3,799.00
    Unit price per 
Shipping calculated at checkout.


The T Series is a very flexible and cost effective amplifier platform loudspeaker processor.

All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops.

The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end and a WiFi access point at the other end and the amplifiers in-between.

    • The loudspeaker processing sets a new benchmark for cost-effective amplification for small and medium sized systems and stage monitors. The T Series can be controlled and configured in different ways.
    • Full control with a PC running Armonía. Here it can be in mixed groups with advanced EQ together with other Powersoft products.
    • Control from the front panel display for things like preset recall (also per output), gain, delay, mute. This makes it very easy to use for small systems in a rental company. The display also shows the available headroom with easy to read numbers in dB as well as other status monitoring.
    • Web app. Use any device with a browser (e.g. a tablet) and access the amplifier via an external WiFi access point to control EQ etc.
    • Group controllable advanced EQ with raised cosine filters
    • Large preset library
    • Preset compatibility with X Series
    • Very long FIR filters (42.6 ms)
    • Control and monitoring through ArmoníaPlus
  • General
    Number of channels 2
    Output power Single channel mode   Bridge mode
    2 Ω 4 Ω 8 Ω       4 Ω 8 Ω    
    1500 W 1500 W 1200 W       3000W 3000W    
    Max output voltage / current 145 Vpeak / 50 Apeak      
    AC Main Power
    Power supply Universal, regulated switch mode
    Nominal power requirement 100-240 V ±10%, 50-60 Hz
    Operating voltage 90 V - 264 V
    Power consuption** 115 V 230 V
    Idle 23 W   23 W  
    1/8 of max output power @ 4 Ω 517 W 4.6 A 527 W 2.7 A
    Operating temperature range 0° - 45° C - 32° - 113° F
    Thermal dissipation** 115 V 230 V
    1/8 of max output power @ 4 Ω 485 BTU/h 122.2 kcal/h 517 BTU/h 130.3 kcal/h
    Gain 32dB
    Input sensitivity 2.57 Vrms
    Max input level 24 dBu
    Frequency response 20 Hz - 20 kHz (±0.5 dB) @ 1 W, 8 Ω
    S/N ratio > 110 dB (20 Hz - 20 kHz, A weighted)
    Crosstalk separation < -70 dB @ 1kHz
    THD+N < 0.1% (typical < 0.5%)
    IMD < 0.1% (typical < 0.5%)
    Input impedance 20 kΩ balanced
    AD Converter 24 Bit Tandem™ @ 48 kHz 125 dB-A Dynamic Range - 0.005 % THD+N
    DA Converter 24 Bit Tandem™ @ 48 kHz 117 dB-A Dynamic Range - 0.003 % THD+N
    Memory/presets 256 MB (RAM) plus 512 MB flash for presets /
    Input equalizer Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
    Crossover linear phase (FIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)
    Delay 2 s (input) + 100 ms (output) for time alignment
    Limiters TruePower™, RMS voltage, RMS current, Peak limiter
    Damping control Active DampingControl™ and LiveImpedance™ measurement
    Front panel
    Indicators and Controllers 8 x Push-button - Setting operating parameters
    1 x Display - Settings and monitoring
    1 x Power switch -
    AC main 1 x IEC C20 connector - 20 A max (region-specific power cord provided)
    Audio signal input 2 x XLR - Signal input
    Loudspeakers 2 x speakON - Neutrik NL4MD
    Network/data 1 x Rj45 socket - RS485 data connection (non-DSP version)
    1 x Rj45 socket - DANTE®
    Dimensions (L x H x W) 484 mm x 44.45 mm x 405 mm (19.1 in x 1.8 in x 16.0 in)
    Weight 6.7 kg (14.8 lb)

We Also Recommend